USB-C to RJ45 FTDI Console Cable

Console Configuration Cable

The Cable Matters USB-C to RJ45 Console Cable connects from a computer USB-C port to the RJ45 console port of a networking switch or router. This rollover cable connects a laptop with Windows, Linux or macOS to a Cisco-standard serial console port for configuration and management. The integrated FTDI chipset handles the USB signaling and protocol functions including an RS-232 level shifter. FTDI drivers are available for download.

Specifications

Host Connector: USB-C Male
Console Port Connector: RJ45 Male
Chipset: FTDI USB to serial UART

Important Notes

Administrator permission is required
Windows 10 requires a CLI terminal utility such as PuTTy for configuration

Rollover Cable

Rollover cable reverses all 8 pins to connect from a computer to a network switch
Cisco-standard wiring pin-out (check the requirements of your equipment)
Data transfer rate up to 250 Kbps
Bus-powered cable

Console Cable Functions

Directly connect to a console port on a network switch
FTDI drivers are integrated into the latest versions of Windows 10 and macOS
Configure a switch or router with direct terminal access from your computer

Important Notes

NOT a crossover cable that reverses TX and RX
Will NOT operate over an Ethernet port for internet access


Thunderbolt 3 Port Compatible Windows 10 computers 32/64 bit macOS 10.11 and up Linux Ubuntu 11.10 and up	Feature-Filled Cable Molded strain-relief for frequent use Snagless RJ45 clip protector Flexible PVC cable jacket	Popular FTDI Chipset Download drivers from Cable Matters QSG included in the package Note: Windows 10 requires a CLI terminal utility such as PuTTy for configuration

Rollover Cable

Console Cable Functions

Thunderbolt 3 Port Compatible

Feature-Filled Cable

Popular FTDI Chipset